If you need to repair the floor of solid wood, add pieces of wood along the edge of the wall - this is one of the simplest places where it can be done. Usually, the parquet board is installed with a 0.6 cm gap from the wall, which gives you an additional space when laying boards. If the only spare board that you have is damaged, there are still ways to work with boards to fill empty places on the edge of the floor.



1

Molding molding for shoes and plinth from the wall with the help of an inquiring. Put a thin piece of cardboard between the paint and the wall so as not to damage the wall. Use the tool where there are nails in Molding so that Molding does not break when removing.



2.

Measure the distance from the existing row of solid wood to the wall, then deduct 0.6 cm to determine which width should be a series. It is necessary to leave the gap to expand between the new wood and the wall.



3.

With the help of a table saw, saw damaged boards in length to make them narrower, if necessary, to accommodate a new row of wood. Before sawing, look if you need to leave a spool or groove; It depends on which the edge of the floor should be replaced. Leave the side that coincides with the existing floor. Cutting part of the boards, you can remove cracked or damaged areas.



4

Cut the boards shorter to remove damaged areas. Many solid wood boards can be saved, cutting off scratched, swelling or peeling sites. This can lead to the fact that in the new row there will be no long boards, as the rest of the floor, but they will be less noticeable next to the wall.



5

Install the boards by inserting the tongues of new boards into the grooves of existing or in the grooves above the existing languages. For the last board in a row, cut off the circular saw of the lower edge of the groove so that the upper edge can rely on the tongue of the existing board; It may be difficult to insert it into place under the tongue, without hitting the board on the wall and without damaging the wall.



6.

Come on the place with the help of hammer and finish nails along the edge of the wall of the new row. Keep an unused nail or zenkovka between the hammer and nails installed and carefully tapping on it to annoy the installed nails. Place the boards so that the seams do not coincide with the seams of the next row.



7.

Replace the plinth and molding for shoes by having them to the place of finish nails. Fill out the recesses from the nails with a putty for wood. Wait until it dries, then pick up the putty and, if necessary, correct the paint on the molding. Indian players are welcomed to join and bet on their favorite esports. To make things even more exciting. 1xBet Promo Code India and learn about totaling up to 13.000 INR for sports betting and staggering € 1950 of free money for casino. 1xBet WELCOME BONUS copy and enter the promo code upon registration. Yes, the 1xBet bonus code is optimized for use on any device, including mobile phones. 1xBet working promo code for today. When you first register, you get 1xBet sign up promo code. Also known as voucher, bonus code, and discount, it allows you to receive exclusive bonuses or expand existing ones.